Product feature
1. One microwave low noise amplification circuits is added in each forward path forestage of OPCA-8100K high-performance power double amplifier modules are used as output ports. Its output level is high and Nonlinear Index is good.
2. Import PHILIPS or MOTOROLA low noise push-pull amplification modules are used as forward path of OPCA-8100 amplifiers. Its output level is high and Nonlinear Index is good.
3. PHILIPS or MOTOROLA return amplifier modules are used as backward path. Its distortion is little and SNR is high.
4. It is more convenient to debug, because of plug-in duplex filters, plug-in fixed (or continuously adjustable) equalizers, plug-in output splitters and scientific and rational on-line detection ports.
5. The equipment can work steadily outdoor under bad environmental condition, because of waterproof aluminium case, high reliability switching power supply and lightning protection system.
Testing Environment:
1. There should be 93 ways PAL-D television signals in the frequency of 862MHz (112.25~855.25MHz) when test the C/CTB and C/CSO.
2. There should be 3 frequencies as f1=65MHz, f2=63MHz and f3=57MHz when test the “Maximum Output Level” of uplink transmission paths.
There should be 3 frequencies as f1=10MHz, f2=60MHz and f3=50MHz when test the of “Carrier to Second-order Inter-modulation ratio ”uplink transmission paths in the level of 110 dBμV.