| Product overview
OPT-1310P series 1310nm optical transmitter is a type of dual power supply pluggable optical transmitter with AGC function. The height of the transmitter is IU, it can be mounted on the 19” frame conveniently. The main devices adopt AOI, XT or Ortel DFB low noise which contains thermoelectric refrigerator, continuous wave laser. The whole technical performance indexes reach the similar imported equipment standard, supplying quality long distance transmission of images, figures or compressed digital signal to cable and telephone communications.
Features
1) High quality: Original system optimal control technology, RF pre-distortion techniques make system getting optimal CTB, CSO and CNR indexes
2) Flexibility: Laser emission and RF processing circuit adopt modular design mode, it is very convenient to provide after-sales service, repairing and maintain.
3) Reliability: The 19 "1U standard rack, built-in high-performance switching power supply, it can work at 85 ~ 265Vac MS level automatic switch, chassis cooling can be automatic control by temperature.
4) Intuition: Laser is the most expensive machine components, machine equipped with microprocessor monitors the working state of the laser, the panel LCD window displays the operating parameters.
5) Network management (Optional): RJ45 port for remote control and management.
6) Plug is draw-out type: switching power supply is draw-out type with aluminum profile structure, it helps greatly to cooling and replacement. Besides it can make dual supply cold-heat backup.
Technical parameters
|
Item |
Unit |
Parameter |
Remark |
|
Laser model |
|
DFB laser |
|
|
Optical wavelength |
nm |
1310±10 |
|
|
Optical modulation modes |
- |
Internal modulation |
|
|
Optical output power |
mW |
2~28 |
|
|
Optical connector form |
- |
SC/APC |
FC/APC optional |
|
Frequency range |
MHz |
45~750(862) |
Optional 1GHZ |
|
Carrier to Noise ratio |
dB |
≥51.0 |
|
|
Flatness |
dB |
±0.75 |
|
|
RF input signal level |
dBuV |
75~85 |
AGC control |
|
C/CTB |
dB |
≥65.0 |
|
|
C/CSO |
dB |
≥60.0 |
|
|
RF input impedance |
Ω |
75 |
|
|
RF input reflection loss |
dB |
>16(47~550)MHz
>14(550~750(862))MHz |
|
|
Network management interface |
|
RJ45 |
Support browser and SNMP |
|
Power supply |
V |
90~265 |
Dual Power supply pluggable |
|
power consumption |
W |
≤50 |
Single power supply |
|
Operating temperature |
℃ |
0~50 |
Automatic chassis controls temperature |
|
Storage temperature |
℃ |
-20~85 |
|
|
Working relative humidity |
% |
20 ~85 |
|
|
Size |
″ |
19″×11″×1.75″ |
(W)x(D)x(H) |
Products series
|
Model |
1310nm optical transmitter (Pluggable type) |
|
Output power in mW |
Output power in dBm |
|
OPT-1310P-04 |
≥4 |
≥6 |
|
OPT-1310P-06 |
≥6 |
≥7.8 |
|
OPT-1310P-08 |
≥8 |
≥9 |
|
OPT-1310P-10 |
≥10 |
≥10 |
|
OPT-1310P-12 |
≥12 |
≥10.8 |
|
OPT-1310P-14 |
≥14 |
≥11.5 |
|
OPT-1310P-16 |
≥16 |
≥12 |
|
OPT-1310P-18 |
≥18 |
≥12.5 |
|
OPT-1310P-20 |
≥20 |
≥13 |
|
OPT-1310P-22 |
≥22 |
≥13.4 |
|
OPT-1310P-24 |
≥24 |
≥13.8 |
|
OPT-1310P-26 |
≥26 |
≥14.0 |
|
OPT-1310P-28 |
≥28 |
≥14.5 | |
