Keyword:

OPR-8604DM 1004DM 4 ways Bi-directional Optical Receiver(RFOG mode optional)

 

(6) Optical AGC control, when input optical power is -7~+2dBm, the output level, CTB, CSO basically unchanged.

 

Item	Unit	Technical Parameters
Forward  part
Optical  Parameters
Receiving Optical Power	dBm	-7 ~ +2
Optical Return Loss	dB	>45
Optical Receiving Wave	nm	1100 ~ 1600
Optical Connector Type		FC/APC, SC/APC or specified by the user
Fiber Type		Single Mode
Link Performance
C/N	dB	≥ 51 (-2dBm input)
C/CTB	dB	≥ 65	Output Level 108 dBμV
C/CSO	dB	≥ 60	Balanced 6dB
RF Parameters
Frequency Range	MHz	45 ~ 862/1003 (or specified by the user)
Flatness in Band	dB	±0.75
Fixed slope	dB	2±0.5
Rated Output Level	dBμV	≥ 108
Max Output Level	dBμV	≥ 112
Output Return Loss	dB	≥14
Output Impedance	Ω	75
Fixed ATT and EQ (common use)	dB	2.3.4.5.6.7.9.13 (or specified by the user)
Reverse  Part
Optical  Parameters
Optical Transmit Wave	nm	1310±10, 1550±10 or specified by the user
Output Optical Power	mW	0.5, 1, 2
Optical Connector Type		FC/APC, SC/APC or specified by the user
RF  Parameters
Frequency Range	MHz	5 ~ 65 (or specified by the user)
Flatness in Band	dB	±1
Input Level	dBμV	72 ~ 85
Output Impedance	Ω	75
General Performance
Power Voltage	V	A: AC (150~265) V; B: AC (35~90) V
Operation Temperature	℃	-40~60
Storage Temperature	℃	-40~65
Relative Humidity	%	Max 95% non-condensing
Consumption	VA	≤ 30
Dimension	mm	240(L)x240(W)150(H)

Note: The forward RF parameters are tested under the condition of using GaAs 25dB double power module in the last stage. Use other module; the parameters will be slightly different.